Table of Contents
Advertisement
10-20
MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide
15. On the development computer, click Load on the TCM toolbar. The Load Terminal window -
Serial tab appears.
Figure 10-15. Load Terminal Window - Serial and Ethernet Tabs
16. For Serial port connections, click the Serial tab and select the Image Files To Load, Comm
Port and Baud Rate from their respective drop-down lists.
For Wireless connections, click the Ethernet tab. A list of available devices and their IP
addresses appear. Only those devices placed into the Wireless transport mode of IPL appear
in this dialog. Select the files to download and the device to receive the files. To load a
device, the status must be "Active."
17. Click Download to begin the operation.
18. During download, the Downloading screen on mobile computer displays the Device Status
and a progress bar.
19. When complete, Device Status displays Result was Success, or in the case of an error, the
cause of the error.
20. On completion, press Enter to return to the IPL menu to select the next partition to
download.
21. To exit IPL, select the System Reset item from the IPL menu (see
Figure 10-7 on page
10-12).
Advertisement
Table of Contents
