7-26
MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide
Spare Battery Insertion and Removal
To insert a spare battery:
1. Insert the battery into the spare battery charging slot in the back of the cradle as shown.
2. Push the battery in. Listen for the click that signifies the battery's latch has locked the
battery into place.
To remove the spare battery, press in the battery latch, then remove the battery from the spare battery
slot.
Spare Battery Charging
1. Ensure the cradle is connected to a power source, see
2. Insert the spare battery into the cradle, see
page
7-26.
The spare battery charging LED blinks amber to indicate charging, then turns solid amber when the
battery is completely charged. The battery charges in approximately four hours, see
page 7-27
for other indications.
Figure 7-16. Inserting the Vehicle Cradle
Spare battery
latch
Power Connection on page
Spare Battery Insertion and Removal on
7-20.
LED Indicators on