Decode Aiming Pattern - Symbol DS6707 Product Reference Manual

4 - 12 DS6707 Digital Imager Scanner Product Reference Guide

Decode Aiming Pattern

Parameter # F0h, 32h
This parameter only applies when in Decode Mode. Select Enable Decode Aiming Pattern to project the
aiming pattern during bar code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off.
With picklist enabled, the decode aiming pattern flashes even when the Decode Aiming
NOTE
Pattern is disabled.
*
Enable Decode Aiming Pattern
(02h)
Disable Decode Aiming Pattern
(00h)