Vcd7000 Vehicle Cradle; Charging The Eda Battery - Symbol MC70 User Manual

VCD7000 Vehicle Cradle

This section describes how to use a VCD7000 vehicle cradle with the EDA. For cradle installation and
communication setup procedures refer to the MC70 Integrator Guide.
Once installed in a vehicle, the cradle:
• holds the EDA securely in place
• provides power for operating the EDA
• provides a serial port for data communication between an EDA and an external device (e.g., a printer)
• re-charges the battery in the EDA
• re-charges a standard capacity or extended capacity spare battery.

Charging the EDA Battery

Insert the EDA into the vehicle cradle to begin charging. A click indicates that the EDA button release locking
mechanism is enabled and the EDA is locked in place.
EDA Battery Charging
Figure 5-6
Ensure the EDA is fully inserted in the cradle. Lack of proper insertion may result in
CAUTION
property damage or personal injury. Symbol Technologies, Inc. is not responsible for any loss
resulting from the use of the products while driving.
Release Lever
Accessories 5 - 7