Using A Headset; Data Capture - Symbol MC70 User Manual

2 - 20 MC70 User Guide
CAUTION
!
stylus.

Using a Headset

You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack into the audio connector on the side of the EDA. Set the EDA's volume
appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
For the best audio performance, symbol recommends a 2.5mm jack headset, p/n 50-11300-050.
Using a Headset
Figure 2-14

Data Capture

The MC70 offers two types of data capture options:
Linear scanning
•
Imaging.
•
Linear Scanner
Data Capture Configurations
Figure 2-15
To prevent damage to the screen, do not use any device other than the Symbol-provided
Imager