Geemarc Wake'n'Shake Light User Manual page 2

7.1 Setting the time
 Press the SET MEM button, the hour will flash.
Press the Up ▲ button to set the hour.

 Press the DOWN ▼ button to set the minute

Press the SET MEM button, Choose between 12 and 24 hour
format with the UP▲ / DOWN▼ buttons.
 Press the SET MEM button, Choose Snooze time 5 to 30 minutes
at 5 minutes steps (Default is 5 minutes) with the UP▲ / DOWN▼
buttons.
 Press the SET MEM button, Time is set.
7.2 Setting and activating alarm
 Press the ALARM button once, Alarm 1
 Press the ALARM button twice, Alarm 2
 Press the ALARM button until OFF fade away.
Setting alarm time by pressing UP▲ or DOWN▼ button.
 Press the SET MEM button each times.
Selecting the alarm sound: The bird, frog, rain forest, wind, seagull,
radio or beep will display a sound.
 Press the ALARM button, the alarm sound is set.

Press the SET MEM button, selecting shaker vibrator
 Press the ALARM button,
Alarm is set and Alarm 1 icon lit up if selected.
If Alarm 2 is selected, Alarm 2 icon lit up.
NOTE:
During the Alarm, press the alarm button
7.3 Setting wake up light
 Press and hold SNOOZE wake'n shake display shown.
Setting the wake'n shake light function.
Default wake n shaker light is OFF,
 Press the UP▲ or DOWN▼ button,
Selecting the wake'n shake light time to 15 or 30 minutes.
Wake'n shaker light is set and will be lit up gradually before the alarm
time.
7.4 Deactivating the alarm
 Press the ALARM button once, Alarm 1
 Press the ALARM button twice, Alarm 2
 Press the ALARM button until OFF showed,
Alarm is deactivated.
7.5 Deactivating the alarm
 Press the ALARM button until OFF fades away.
Alarm is activated again.
NOTE:
The wake'n shake light will be deactivated when alarm is OFF.
7.6 Alarm Tone
 Press the TONE button at normal Time mode.
Setting the Tone in 10 frequency.
Default Tone is #5 frequency.

Press the UP▲ or DOWN▼ button.
Selecting desired tone frequency in alarm.
4
Desire tone frequency is set.
12:00
7.7 Alarm Volume
12

Press the UP▲ or DOWN▼ button at normal Time mode.
Selecting the volume of alarm.
00
Default volume is U08 and maximum level is U20.
12 hr
7.8 Connecting Shaker Vibrator
 Connect shaker vibrator at rear jack
Z 05
Z
7.9 Light Function
12:00

Press the LIGHT
User device as normal lamp.
Light will be lit up gradually with the light icon
will be set.
 Press the UP▲ or DOWN▼ button adjusting the light intensity.
will be set.
The default intensity L07 shown and the max intensity is L15.
 Press the LIGHT
To switch OFF the light and light icon will fade.
7.10 Radio Function
 Press the RADIO
The radio frequency currently set will appear on the display.
12:00
 Press the UP▲ or DOWN▼ button.
Setting the desired radio frequency.
.
Tip: to start the automatic scan, press and hold the UP▲ or
DOWN▼ button briefly and then release it again.
 Press the TONE
The default Volume U06 will show on the display.
 Press the UP▲ or DOWN▼ button.
to stop it permanently.
Adjusting the volume, and the max volume is U12.
7.11 Preset Radio Station / Listening Preset Radio Station
OFF  Press the SET MEM
The current radio station is stored in S01.
 Press the SET MEM
The new desired radio station is stored in S02.
Max can be stored 10 radio stations.
15
 Press the SET MEM
30
Listening preset radio stations and starts sequence S01 > S02 > S03.
7.12 Goodnight function

Press the
will be deactivated.

Press the UP▲ or DOWN▼ button to select desired switch off time from
will be deactivated.
5 minutes to 90 minutes.
OFF  Press the TONE
The selected switch off time will start to count with the SLEEP icon
flashing.
 Press the
This function automatically switches off the radio or MP3 or a natural
sound after a set period of time.
7.13 Display Illumination
 Press the LIGHT
Adjusting the display brightness by press the Light button each times.
F05
Brightness changes U03>U04>U01>U02, Max brightness is U04.
7.14 MP3 Playback Function
.
button at normal Time mode.
on.
button again.
button at normal Time mode.
U06
button.
button until S01 shows.
button until S02 shows.
button each times.
SNOOZE button until OFF SLEEP shown.
button exit or wait 6 seconds.
SNOOZE button until the remaining time shown.
button until U03 shown at normal time mode.
5
 Press the RADIO button.
 Connect the MP3 to the rear jack
 AU shown on display.
U08
 Press the TONE button. The default Volume U06 will shown on the
display.
 Press the UP▲ or DOWN▼ button.
Adjusting the volume, and the max volume is U06.
7.15 Smart Phone Charger Function

Connect the Smart Phone with USB cable to rear USB socket
charge the Smart Phone.
8. Cleaning and maintenance
 Clean the device with a dry cloth.
L07
 Do not use any abrasive cleaning products.
 Protect the device from knocks, damp, dust, chemicals, drastic changes in
temperature, and nearby sources of heat (ovens, heaters).
9. Technical Data
 Dimensions:120 x 170 x 120mm
 Weight: approx. 508g
 Voltage supply: 100-240V; 50/60Hz; 0.7A
 Protection class II
 For indoor use only
 Radiofrequency range: 87.5-108.0 MHz FM
 Illuminance: 300lux
10. GUARANTEE
From the moment your Geemarc product is purchased, Geemarc guarantee it for the
period of two years. During this time, all repairs or replacements (at our discretion) are
free of charge. Should you experience a problem then contact our help line or visit our
website at www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to any parts. The
product must not be tampered with or taken apart by anyone who is not an authorized
Geemarc representative.
S01
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE
S02
RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
11. DECLARATIONS:
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of the RED 2014/53/UE.
OFF
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in place for the
products at the end of their useful life are recycled in the best way.
When this product is finished with, please do not put it in your domestic waste bin.
Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they should
accept it.
Thus if you respect these instructions you ensure human health and environmental
protection.
U03
For product support and help visit our website at www.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden City,
Hertfordshire, AL7 1SB,UK
telephone 01707 387602 or fax 01707 832529
AU
by cable.
U06
to
QUGWake&ShakeLight_En_A3_V1.8
6