Operation; Care & Maintenance - Levoit LV-H132 Manual

Operation

Button Controls
purifier.
The nightlight will automatically come on
when you turn on the air purifier. Press the
nightlight button once to dim the light, and
Lights up when the air filter needs to be
replaced. Press and hold the filter reset
button for 3 seconds after changing the
air filter in the purifier. (See Changing &
Replacing the Filters.)
Press the fan speed button to cycle
through the three fan speeds of the air
purifier. Please note that the purifier will
automatically default to level 2 when it is
turned on.
Care & Maintenance
General Maintenance
• Wipe down the housing with a soft, clean cloth.
• DO NOT immerse the purifier in water or liquid
detergents.
• If necessary, wipe the housing with a clean damp
cloth, then immediately dry the housing with a
separate clean cloth.
Changing & Replacing the Filter
The filter reset button will light up when the air filter
needs to be replaced. Only use Levoit LV-H132-RF True
HEPA Filters when changing the filter for this appliance.
Follow the steps below to correctly replace the filter in
your air purifier. Scan the following QR Code or visit
Amazon.com and search B06XD7X81D to purchase
replacement filters for this appliance.
1.
2. Flip over the purifier and remove the filter cover.
3. Remove the old filter.
4. Clean any remaining dust or hair inside the purifier
using a vacuum hose. DO NOT use water or liquids to
clean the purifier.
9
Tabs should face
the opening.