Philips 1000 Series Manual page 15

2
1
1
2
Ordering accessories
2 Press the release button to open the shaving
unit. Pull the shaving unit off the appliance.
3 Turn the lock anticlockwise and remove the
retaining frame.
4 Remove the shaving heads from the shaving
unit and throw them away.
5 Place new shaving heads in the shaving unit.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
6 Put the retaining frame back into the shaving
unit and turn the lock clockwise.
7 Insert the lug of the shaving unit into the slot in
the top of the appliance. Then close the shaving
unit ('click').
Note: If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
15
English