PRO Intellect Technology PRO 85 Series User Manual page 28

Code
Right sensor is either blocked or
E01
failed
Left sensor is either blocked or
E02
failed.
Starting sensor is blocked by the
E05
banknotes or is dirty.
Sensor in the stacker is blocked by
E06
banknotes or is dirty.
In the event of error codes E01 – E07, contact a licensed service center.
28
Reason
System Errors
Solution
Clean or replace the sensor
Clean or replace the sensor
Remove banknotes from the hopper,
clean or change the sensor.
Remove banknotes from the stacker,
clean or change the sensor