Table of Contents
Advertisement
xcvrs_3-2002.fm Page 8 Tuesday, April 2, 2002 3:23 PM
Specifications for the HP Procurve High-Speed Transceivers
Laser
The Gigabit-SX and Gigabit-LX transceivers are Class 1 Laser Products
(Laser Klasse 1). They comply with IEC 825-2: 1993.
Environmental
Operating
Temperature:
0°C to 55°C (32°F to 131°F)
Relative humidity:
15% to 95% at 40°C (104°F)
(non-condensing)
Maximum altitude:
4.6 km (15,000 ft)
Electromagnetic
Emissions
FCC part 15 Class A
EN55022 / CISPR-22 Class A
VCCI Class A
Complies with Canadian EMC Class A requirements
As described on page 2 of this document, these transceivers are designed
for operation with HP Procurve networking products with compatible
transceiver slots, and are listed in the Declaration of Conformity for those
products. See the Installation Guide for the network products for a copy
of the declaration and for other EMC statements.
Standards
The Gigabit-SX Transceiver is compatible with the IEEE 802.3z
Gigabit-SX standard. It transmits at 850 nm wavelength and accepts the
multimode fiber-optic cables for Gigabit-SX described on page 5.
The Gigabit-LX Transceiver is compatible with the IEEE 802.3z
Gigabit-LX standard. It transmits at 1300 nm wavelength and accepts the
single-mode or multimode fiber-optic cables for Gigabit-LX described on
page 5.
The 100/1000-T Transceiver is compatible with the IEEE 802.3ab
1000Base-T and IEEE 802.3u standards for 1000 Mbps and 100 Mbps
operation, respectively.
The 100-FX SC Transceiver is compatible with the IEEE 802.3u
100Base-FX standard. It transmits at 1300 nm wavelength and accepts
the multimode fiber-optic cables described on page 5.
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Non-Operating
-40°C to 70°C (-40°F to 158°F)
15% to 90% at 65°C (149°F)
4.6 km (15,000 ft)
Advertisement
Table of Contents
