Omron BP7100CAN Instruction Manual page 18

2.
Remove the arm cuff.
3.
Press the START/STOP button to turn the monitor off.
The monitor automatically stores the measurement result in its memory.
It will automatically turn off after 2 minutes.
Note: Wait 2-3 minutes before taking another measurement. Waiting between
measurements allows the arteries to return to the condition prior to
taking a measurement.
3.4 Using the Memory Function
The monitor automatically stores the results up to 14 sets.
Note: If the memory is full, the monitor will delete the oldest value.
To View the Measurement Values Stored in Memory
1.
Press the
The Memory number appears for a second
before the pulse rate is displayed.
The newest set is numbered "1".
2.
Press the
memory.
button.
button repeatedly to view the values stored in
18