Samsung DW80M9 Series User Manual page 12

using your dishwasher
Smart Control
9
Start
10
You can select options (Self Clean, Lower, Speed Booster, Zone Booster, Sanitize, Delay Start) before
starting a cycle. If you change the cycle after selecting an option, the original cycle is reset.
When you pause a cycle by opening the door during operation, press the Start button before closing
the door to continue the cycle.
Push the door closed fi rmly within 3 seconds of pressing the Start button.
If the door is not closed within 3 seconds, the cycle will not start.
To prevent the touchpad from losing response sensitivity, follow these instructions:
- Touch the center of each keypad using one fi nger. Do not push.
- Clean the touch control's surface regularly with a soft, damp cloth.
- Be careful not to touch more than one touch key pad at a time, except as directed.
DW9900M_DD68-00184A-06_EN.indd 12 DW9900M_DD68-00184A-06_EN.indd 12
To connect the dishwasher to your smart phone, use this option.
For details, see page 17.
To connect the dishwasher to your smart phone the fi rst time. press and hold
Smart Control to start the AP mode in the dishwasher.
To start a cycle, press the Start button before closing the door.
*Cancel: To cancel a currently running cycle and drain the dishwasher, press and hold the Start
button for three (3) seconds.
Once the dishwasher is reset, select a cycle and option, and then press Start to restart the
dishwasher.
O O X
English - 12
2018-10-12 2018-10-12 11:55:13 11:55:13