Timer Program Extension - Sylvania 13 inch SRC2213W Owner's Manual

F.FWD/B button.
For every day recording : To record a TV program at
the same time on the same channel every day.
(Example: Monday through Sunday)
Press the STOP/L (down) button
until "EVRY DAY" appears.
Then, press the F.FWD/B but-
ton.
For weekly recording : To record a TV program at
the same time on the same channel every week.
(Example: every Monday)
Press the STOP/L (down) button
until "EVRY" and your desired
day of the week appear together.
Then, press the F.FWD/B but-
ton.
5
Set beginning hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the F.FWD/B button.
6
Set beginning minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "30" for 7:30PM)
Then, press the F.FWD/B button.
7
Set end hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the F.FWD/B button.
8
Set end minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: "50" for 8:50PM)
Then, press the F.FWD/B button.
9
Set the tape speed
Press the PLAY/K or STOP/L but-
ton until the desired tape speed
appears. (Example: SP)
Then, press the F.FWD/B button.
The program is now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the MENU button on the remote control
to return to original mode.
10
Press the POWER button to set automatic timer
recording. The RECORD indicator lights up.
•
You must turn off the TV/VCR to activate automat-
– TIMER PROGRAMMING –
ic timer recording.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
If power is not turned off and you continue watch-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 EVRY DAY -:- - -:- - - -
ing TV, "TIMER REC STANDBY" starts flashing
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
on the TV screen 2 minutes before the programmed
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
start time.

TIMER PROGRAM EXTENSION

– TIMER PROGRAMMING –
To shift the time schedule of an automatic timer
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
recording.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 EVRY MON -:- - -:- - - -
1)Press the POWER button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
2)Repeat step [1] on page 21.
- - -/- - - - - -:- - -:- - - -
3)Press the RECORD button and select the desired
program using the PLAY/K or STOP/L button.
– TIMER PROGRAMMING –
4)Press the RECORD button again.
CH DATE BEGIN END
Each additional push will shift forward the
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
begin/end time for recording by 10 minutes. When
P
B 61 7/04 SUN 7:12 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - the recording is already in progress, each additional
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
push will shift forward the end time only. If you
want to cancel while setting, press the
PAUSE/STILL button on the remote control. The
– TIMER PROGRAMMING –
recording time returns to the original time.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
NOTE: When you shift forward the time schedule
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P
B 61 7/04 SUN 7:30 -:- - - -
M
during recording, the recording speed will automat-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - ically be set to the SLP mode.
- - -/- - - - - -:- - -:- - - -
5)Press the F.FWD/B or REW/s button to exit the
setting menu. Then press the MENU button on the
– TIMER PROGRAMMING –
remote control to return to original mode.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - TO CORRECT A PROGRAM
P P
B 61 7/04 SUN 7:30 8:30
M M
- - -/- - - - - -:- - -: - -
- - -/- - - - - -:- - -:- - - -
•
While setting a program; press the REW/s but-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
ton to go back one step and enter the correct num-
bers using the PLAY/K or STOP/L button.
•
– TIMER PROGRAMMING – After setting a program;
CH DATE BEGIN END
1)Press the POWER button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
2)Repeat steps [1] - [2] on page 21.
P P
B 61 7/04 SUN 7:30 8:50 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
3)Press the F.FWD/B button (or press the REW/s
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
4)Press the POWER button to set automatic timer
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/04 SUN 7:30 8:50 SP
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- 22 -
Set the timer
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/K or STOP/L but-
ton.
recording.
EN
9I03