C Tv Operation; Watching A Tv Program; Degaussing; Picture Control - Sylvania SSC719C Owner's Manual

WATCHING A TV PROGRAM

1
Turn on the TV/DVD/VHS
Press the POWER button to turn on the
TV/DVD/VHS.
2
Select the channel number
Press the CHANNEL K or L button to select your
desired channel number or press the number buttons
on the remote control.
Remember: If the TV/DVD/VHS is connected to a
cable box or satellite box, the TV/DVD/VHS must be
on CH3 or CH4, then the channel to be viewed must
be selected on the cable box or satellite box.
3
Adjust sound
Press the VOLUME X X or Y Y button
to adjust the volume.
NOTES:
•
If you press the CHANNEL o or p in the DVD
mode, you can change the TV channels.
Even if you turn off the TV/DVD/VHS in the DVD
mode, when you turn it on again, it will go into the
TV/VCR mode.

DEGAUSSING

Magnetism from nearby appliances might affect the
color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.
TV OPERATION
The TV/DVD/VHS's picture controls – BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS –
are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
•
Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
•
When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•
TV/DVD/VHS power must be turned on.
1
Select "PICTURE CONTROL"
Press the PICTURE button on the remote control.
VOLUME 20
C C C C C
C C C C C C C
2
Select item you want to adjust
Press the Arrow K or L button until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3
Adjust the picture control
Press the Arrow B or s button to adjust to your
desired level.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
•
If there is a power failure of any kind, the unit will
retain its memory for this feature.
- 19 -

PICTURE CONTROL

Arrow s
to decrease
brightness
to decrease
contrast
to pale
to purple
to soft
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
Arrow B
to increase
brightness
to increase
contrast
to brilliant
to green
to clear
EN
1C29