Table of Contents
Advertisement
OPERATION AND SETTINGS
PICTURE____
SLEEP
+100
{-}
C+T0}
_SKIP_
ZOOM
MUTE
® Shaded
buttons are used for following
operation.
1 Plug the power cord into a standard
AC outlet.
,-- NOTE
For channel number
selection with number
buttons:
®To se]eG single-digit charnel hum ber, press
[0] first, (e.g, Press [0] [2] tot channel 2.)
* To select cable channels which are higher
than 99, press [+100/+10]
first,
(e,g. Press [+1001+10] [2] [5] %r channel 125,)
4 Press [VOL A /V] to select the desired vol=
ume level
VOLUME
2O
llllllmiiiiii.
®Press [MUTE] to instantly mute tile sound.
Press it again to restore the previous vokm_e
Bevel.
NOTE
If you press [CH. A / T] in the DVD mode,
]
you can change die TV channels. Even if you
J
mm off the unit in _he DVD mode, when you
mm i_ on again it will go into tile TV mode.
2 Press [POWER] to turn on the unit.
C-2
3
Press [CH. A / v] to select the desired chan-
nel number
OR
Press the Number buttons
to enter the
desired channel number.
((T3 (g3(_)"
TO WATTjH
CABLE
OR SATELLITE
CttANNEL
tf _t_eunit is connected to a cane box or satellite
box, press [CH. A / T] to selec_ CH3 or CH4
according to the ouq?ut chamlel setting of the device
and seleG desh:ed charnel on that device.
"i"0 WAgTjH
EXTERNAL
INPUT
When an external equipment is connected to the t_:ont
AUIDIO/VIDEO input jacks, press [SELECT] or
[CH. A / V] repeatedly until "VIDEO1" or
"VIDEO2" appears on die screen.
_-- NOTE
* If a disc' is inside the mlit, "DISC iNSiDE" mes-
sage is displayed on the screen for i0 seconds,
DISC _NSlDE
* _tb clear the message instantly, press [CLEAR],
- 12 -
EN
Advertisement
Table of Contents
