Setting Up Anynet+ (Hdmi-Cec); Using Anynet+ (Hdmi-Cec) - Samsung 6300 Series E-Manual

Using Anynet+ (HDMI-CEC)

Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's
remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with
the panel keys.
You can configure the TV's universal remote function to control third-party cable boxes, Blu-ray
players, and home theatres that do not support HDMI-CEC using the TV's remote control.
Anynet+ Requirements:
●
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
●
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not
support Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
●
The TV remote control may not function under certain circumstances. If this occurs select the
Anynet+ device again.
●
Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when
those devices are either in standby mode or turned on.
●
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type).
With home theatre systems, however, the number of systems that can be controlled is limited to
one.
●
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI
cable and the device's digital audio output connector directly to the home theatre system.
●
A home theatre system that has been connected to the TV using an HDMI cable and an
optical cable supports 2-channel audio only. 5.1-channel audio is, however, available for digital
broadcasts with 5.1-channel audio.

Setting Up Anynet+ (HDMI-CEC)

System Anynet+ (HDMI-CEC)
●
Anynet+ (HDMI-CEC)
Enables/disables
On to enable all
●
Auto Turn Off
Try Now
When set to Yes. turns off
turned off.
"
Some Anynet+ (HDMI-CEC)
●
Search for Devices
Search for Anynet+ (HDMI-CEC)
Try Now
Try Now
Anynet+ (HDMI-CEC). Set to
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
compatible devices do not support this feature.
Try Now
compatible devices.
Off to disable all Anynet+ related features. Set to
related features.
compatible external devices when the TV is