Adjusting The Picture For Easier Viewing (Picture Options) - Samsung 6300 Series E-Manual

Adjusting the Picture for Easier Viewing (Picture Options)

Picture Picture Options
Select Picture Picture Options
"
When the TV is connected to a computer via an HDMI-DVI cable, only
Choose a Picture Mode
●
Colour Tone
Try Now
Adjusts the colour tone. The setting is applied on an individual
Picture Mode is changed, the corresponding setting will be applied automatically.
"
If the Picture Mode
●
Digital Clean View
Reduces static and ghosting caused by a weak signal. Selecting
signal strength at the bottom the screen. Green indicates the best possible signal.
"
Auto Visualisation
●
MPEG Noise Filter
Reduces MPEG noise and improves video quality.
●
HDMI Black Level
Some external devices connected to the TV via an HDMI cable can have issues, such as low
black level, low contrast, and dull colours. Use HDMI Black Level to adjust the black level to
compensate.
"
This is only available when using an external device connected to the TV via an HDMI connector.
"
This function is only available when the input signal, connected to the TV via an HDMI connector, is set
to RGB444.
●
HDMI UHD Color
"
Depending on the specific model.
Allows you to set the
When set to On, the TV optimises processing of UHD 50P/60P signals.
To configure the
external devices and disconnect the HDMI cables connected to the TV. Then, select this function,
and then follow the on-screen instructions.
"
Make sure that the HDMI cable is not connected to the TV. The
completed only if the HDMI cable is not connected to the HDMI connector.
"
After setting the HDMI connector to On, it takes some time to complete the conversion.
"
If the HDMI connector with
UHD content, the device may not operate properly. If this is the case, set
connector to Off.
"
Each HDMI connector can be individually optimised for
available only with a video source featuring the UHD 50P/60P 4:4:4 and 4:2:2 specifications.
"
The HDMI connector with
HDMI connector with
"
Before setting up this mode, you need to unplug the HDMI cable from TV.
Try Now
to make additional adjustments for an easier viewing experience.
and then adjust the settings.
is set to Dynamic, you will only be able to choose
Try Now
available for analogue channels only.
Try Now
Try Now
Try Now
HDMI UHD Color
HDMI UHD Color mode for each HDMI connector, turn off the power of the
HDMI UHD Color
HDMI UHD Color
HDMI UHD Color
mode to On or Off for each HDMI connector on the TV.
enabled is connected to a device that does not support
HDMI UHD
set to Off supports up to UHD 50P/60P 4:2:0, while the
set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2.
Colour Tone can be adjusted.
Picture Mode basis. When a
Cool or Standard.
Auto Visualisation
HDMI UHD Color settings will be
HDMI UHD Color
Color. However, HDMI UHD Color
displays the
for the HDMI
is