Setting The Time And Using The Timer; Setting The Current Time - Samsung 6300 Series E-Manual

Setting the Time and Using the Timer

Setting the Current Time

System Time Clock
Set the clock manually or automatically. Once the clock has been set, you can press the
on the standard remote or press the
check the current time.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
System Time Clock
Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel.
To enable this option, the TV's Antenna jack must be connected to either an antenna or a cable
output and must be receiving digital broadcasts. The accuracy of the time information received may
vary depending on the channel and signal. If your TV is connected to a set-top-box using HDMI or
Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode
System Time Clock
If the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as
-/+ 12 hours. Select
correct time.
"
Time Offset adjusts the time through network connections and is only available if the
and the TV is connected to the Internet though a local area network.
"
Time Offset will adjust the time if the TV fails to receive time information through normal digital broadcast
signals.
Setting the Clock Manually
System Time Clock
Manually enter the time. Set
time and date.
Clock Set: Set the current
Try Now
MENU/123
Clock Mode
Clock Mode
System Time Clock
Clock Set
Try Now
Clock Mode
Date and Time.
button on the smart control, then select the
Try Now
Time Offset
Try Now
Clock Mode
to Manual and then select
Time Offset and offset the clock to the
Clock
Clock Set to enter the current
INFO button
INFO to
is set to Auto