Next steps
1
Connect the
battery cable
2
Install the
base
cover.
3
Install the
SD memory
4
Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1
Follow the procedure in
2
Remove the
SD memory
3
Remove the
base
cover.
4
Disconnect the
battery
Steps
1
Partially peel off the Mylar sheet that covers the WLAN card [1].
2
Remove the single (M2x2) screw [2] that secures the WLAN card bracket to the WLAN card.
3
Remove the WLAN card bracket from the WLAN card.
4
Disconnect the wireless antennae cables [4] from the connectors on the WLAN card.
5
Slide and remove the WLAN card [5] from the connector on the system board.
card.
after working inside your
before working inside your
card.
cable.
computer.
computer.
Removing and installing components
35