Assembly; Unpacking; Assembling The Fire Pit; Installing The Fire Pit - tepro SILVER CITY User Manual

Assembly

Unpacking

Hazards for children!
Children may become
entangled in packaging foil
and suffocate.
– Never let children play with packaging
foil.
– Make sure that children do not place
any small assembly parts in their
mouth. They could swallow small parts
and suffocate.
• Unpack the device and check for com-
pleteness.

Assembling the fire pit

Note:
Assemble the fire pit as illustrated. All
screw nuts must be installed on the
inside of the fire pit.
First connect all parts, connectors,
screws and nuts loosely. After assembly
of all parts, tighten all screws and nuts.
Danger! Risk of cuts!
Sheet metal parts can have
sharp edges. Be cautious dur-
ing assembly.
1. Installing the legs
Attach the legs (7) to the small ring (5)
using the screws (9) and nuts (10).
2. Installing the large ring
Attach the large ring (6) to the legs (7)
using the screws (11) and nuts (10).
3. Inserting the fire bowl and fire
grate
3a. Place the fire bowl (4) onto the
small ring.
P150212-TEPRO_1035_Feuerstelle_SilverCity_DE_GB_20150803 15
3b. Place the fire grate (3) inside
the fire bowl (4).
3c. Attach the ring handle (1) to
the spark screen (2) using the nut.
3d. Place the spark screen (2) on
the fire bowl (4).
Important: Tighten all screws.

Installing the fire pit

Attention Risk of damage!
During use, screws can gradu-
ally loosen and as a result
compromise the stability of the
fire pit. Check that all screws
are tightened before use. If
necessary, tighten all screws to
guarantee stability.
• Before use, place the fire pit on a flat,
stable surface outdoors.

Operation

Danger Risk of burning!
The fire pit and the fuel con-
tained therein become very hot
during use. Any contact can
cause severe burns. Always
wear heat-resistant gloves (e.g.
oven mitts) and proper clothes.
– Keep away from hot parts as any con-
tact can cause severe burns.
– Do not wear any clothing with wide
sleeves.
GB
15
3/8/15 12:17 PM