Assembly; Unpacking; Assembling The Fire Basket; Positioning The Fire Basket - tepro Gracewood 1027 Instruction Manual

Assembly

Unpacking

Danger Risks to children!
While playing, children can
become caught in the packaging
film and choke.
– Do not let children play with the packaging
films.
– Make sure that children do not put any
small assembly parts into their mouths.
They could swallow the parts and
choke on them.
• Unpack the device and check it for
completeness.

Assembling the fire basket

Please note:
Assemble the fire basket as shown. All
nuts should be placed on the inside of the
fire basket.
Firstly, all parts, connecting elements,
screws, and nuts should be loosely
assembled. Once all the parts have been
assembled, tighten all of the screws and
nuts.
Danger Risk of cutting!
Sheet metal parts can have
sharp corners. Take care during
assembly.
• Screw the support legs (B) into place
under the fire basket (A) using the
screws (S1) and nuts (S2).
Important: All screws must be tightly
fastened.
P1700609-TEPRO_1127_Feuerkorb_ Gracewood_DE_GB.indb 15

Positioning the fire basket

Attention Risk of damage!
During use,
connections
loosen and compromise the
stability of the fire basket.
Check the stability of the
screws prior to each use. If
necessary, tighten all of the
screws again to ensure the fire
basket is standing securely.
• Before use, place the fire basket on an
even, firm surface outdoors.

Operation

Danger Risk of burning!
The fire basket and the fuel
inside it become very hot
during operation, such that any
contact with these can lead to
severe burns. Wear fire-proof
gloves (e.g. barbecue gloves)
and appropriate clothing.
– Keep sufficient distance from the hot
parts, since any contact can lead to
severe burns.
– Do not wear any clothing with wide
sleeves.
t
the screw
can gradually
15
12/6/2017 12:47 PM