Cleaning And Maintenance - tepro SILVER CITY User Manual

Table of Contents

Advertisement

Available languages

Available languages

GB
Danger Risk of burning!
Never use liquids such as ben-
zene, turpentine, denatured al-
cohol, etc. for lighting or re-
lighting.
ignite explosively and are to
some extend poisonous. Use a
dry lighter or chimney starter
instead.
– Never add lighter fluid or charcoal/
wood dampened with lighter fluid to hot
or warm charcoal/wood.
– Only use dry lighters or special grill
lighter fluids according to EN 1860-3
for lighting.
1.
Make a pyramid from small wooden
pieces.
2.
Place the dry lighter inside the
pyramid.
3.
Set the dry lighter on fire.
4.
Once the small wooden pieces are
burning, you can add larger wooden
pieces.
Danger Risk of burning!
Always make sure the fire does
not get too big. Never leave
open fire or ember unattended.
Danger Risk of injury!
Improper repairs can cause the
device to not function safely
anymore. That creates hazards
for you and your surrounding.
16
P150212-TEPRO_1035_Feuerstelle_SilverCity_DE_GB_20150803 16
Such
substances
Cleaning and
maintenance
Your fire pit is made of high-quality mate-
rials. To clean and maintain the surfaces,
please heed the following instructions:
Danger Risk of burning!
Let the fire pit cool down com-
pletely before cleaning.
– Empty the ashes once the fuel has
burned down completely and is out.
Health hazard!
Do not use any paint solvents or
thinners to remove stains.
Attention Risk of damage!
Do not use any strong or abra-
sive solvents or scouring pads
as such products attack the
grill's surfaces and leave per-
manent markings.
• Leave the fuel to burn out after use.
That will help reduce the cleaning ef-
fort.
• Remove the cold ashes. Regularly
clean the fire pit, preferably after each
use.
• Remove any loose deposits on the fire
pit using a wet sponge.
• Use a soft, clean cloth to dry. Be care-
ful not to scratch the surfaces while
drying.
• In general, clean the inner and outer
surfaces with warm soapy water.
• Tighten all screws before each use in
order to ensure stability of the fire pit
at all times.
• Cover the device to protect it against
moisture during storage.
• Store the fire pit at a dry, well-ventilat-
ed location.
3/8/15 12:17 PM

Advertisement

Chapters

Table of Contents
loading

Table of Contents