Assembly; Unpacking; Assembling The Fire Basket; Positioning The Fire Basket - tepro Gracewood 1127 Instruction Manual

Assembly

unpacking

Danger Risks to children!
While playing,
can become caught in the
packaging film and choke.
– Do not let children play with the
packaging films.
– Make sure that children do not put any
small assembly parts into their mouths.
They could swallow the parts and
choke on them.
• Unpack the device and check it for
completeness.

Assembling the fire basket

Please note:
Assemble the fire basket as shown. All
nuts should be placed on the inside of the
fire basket.
Firstly, all parts, connecting elements,
screws, and nuts should be loosely
assembled. Once all the parts have been
assembled, tighten all of the screws and
nuts.
Danger! Risk of cutting!
Sheet metal parts can have
sharp corners.
during assembly.
• Screw the support legs (B) into place
under the fire basket (A) using the
screws (S1) and nuts (S2).
Important: All screws must be tightly
fastened.
Positioning the fire
basket
Attention Risk of damage!
children
• Before use, place the fire basket on an
even, firm surface outdoors.

Operation

Danger Risk of burning!
– Keep sufficient distance from the hot
parts, since any contact can lead to
severe burns.
Take care
– Do not wear any clothing with wide
sleeves.
During use, the
connections can gradually
loosen and compromise the
stability of the fire basket.
Check the stability of the
screws prior to each use. If
necessary, tighten all of the
screws again to ensure the fire
basket is standing securely.
The fire basket and the fuel
inside it become very hot
during operation, such that any
contact with these can lead to
severe burns. Wear fire-proof
gloves (e.g. barbecue gloves)
and appropriate clothing.
t
screw
15