Assembly; Unpacking; Assembling The Fire Basket - tepro WILLISTON Instruction Manual

Fire basket
Table of Contents

Advertisement

Available languages

Available languages

– Only clean the fire basket once the it
has cooled down completely.
– When adding fuel, wear heat-resistant
gloves (Glove Category II with regard
to heat protection, e.g. DIN-EN 407).
– Wear appropriate clothing. Long, loose
sleeves can easily catch fire!
– Wear sturdy, closed shoes. Sandals do
not provide any protection against hot
charcoal pieces!
– Never leave open fire or embers unat-
tended. Risk of injuries and fire!
– Always have a bucket of sand ready
for extinguishing fires in case of emer-
gency.
– Put the remaining charcoal and ashes
into a non-flammable metal container
and then fill this container to the top
with water. Leave the charcoal and wa-
ter in the metal container for 24 hours
before disposal.
– Only use well-dried wood (storage pe-
riod of at least 3 years) or commercially
available briquettes.
– Never use the fire basket as a barbe-
cue.
– Take your neighbours into considera-
tion, so that smoke or odours will not
disturb them and their property does
not get endangered.
P180177-TEPRO_1077_Feuerkorb_ Williston_DE_GB_20180906.indd 15

Assembly

Unpacking

Danger Risks to children!
While playing, children can be-
come caught in the packaging
film and choke.
– Do not let children play with the packag-
ing films.
– Make sure that children do not put any
small assembly parts into their mouths.
They could swallow the parts and
choke on them.
• Unpack the device and check it for
completeness.

Assembling the fire basket

Please note:
Assemble the fire basket as shown. All
nuts should be placed on the inside of
the fire basket.
Firstly, all parts, connecting elements,
screws, and nuts should be loosely as-
sembled. Once all the parts have been
assembled, tighten all of the screws and
nuts.
Danger Risk of cutting!
Sheet metal parts can have
sharp corners. Take care dur-
ing assembly.
1. Connect the three fire basket walls
(1) with screws (A) and nuts (B). Use
the upper and middle holes for the
screws.
2. Use screws (A) and nuts (B) to attach
the support legs (3) to the fire basket
bottom (2).
t
15
6/9/2018 12:52 PM

Advertisement

Chapters

Table of Contents
loading

Table of Contents