Advertisement
li nd ab | w e s im pli fy c on t r u ct i on
Pascal MBB-E / MBBV-S
Maintenance
Vedligeholdelse
Maintenance
Vedligeholdelse
Underhåll
Huolto
Wartung
Manutenzione
Entretien
A
The front of the damper unit must along its full circumference be
placed just inside the opening of the MBB-E / MBBV-S spigot.
Spjæld enhedens front skal i hele sin omkreds placeres lige
indenfor MBB-E / MBBV-S tudens åbning.
The front of the damper unit must along its full circumference be
placed just inside the opening of the MBB-E / MBBV-S spigot. -SE
The front of the damper unit must along its full circumference be
placed just inside the opening of the MBB-E / MBBV-S spigot. -FIN
Die Front der Drosseleinheit muss über seine gesamte Umfang
gerade in der Öffnung des MBB-E / MBBV-S spigot platziert
La parte frontale della serranda deve essere inserita nell'imbocco
del plenum MBB-E / MBBV-S.
La face avant du registre doit être placée à l'intérieur du piquage
du MBB-E / MBBV-S sur toute sa circonférence.
B
Now press firmly and the damper unit will click into place.
Tryk nu godt til og spjældenheden vil "klikke" på plads.
Tryck nu hårt till och spjällenheten "klickar" på plats -SE
Now press firmly and the damper unit will click into place. -FIN
Now press firmly and the damper unit will click into place.-DE
Premere forte e la serranda scatterà in posizione
Presser fortement pour cliquer le registre dans son emplacement.
MBB-E /
MBBV-S
!
Ød
1
mm
100
x 2
125
x 2
160
x 2
200
x 3
250
x 3
315
x 5
32
Underhåll
- Mounting damper
- Monter spjæld
- Montera spjäll
- Mounting damper -FIN
- Drossel montieren
- Installazione della serranda
- Montage du registre
werden.
We reserve the right to make changes
Huolto
Wartung
Click !
2019-05-09
Manutenzione
Entratien
MBB-E
Ød
1
Ød
2
MBB-E /
MBBV-S
MBB-E /
MBBV-S
Click !
Advertisement
