Runner - imants ShockWave 100 Manual

9.3.2 Runner
The machine rests on the runner pack. The working depth is adjusted by adjusting the runner pack.
A running roller is attached to the runner pack.
Procedure
1. Raise the machine
2. During all operational activities, make
sure the machine cannot roll away
unintentionally.
3. Secure the tractor to prevent unintended
starting or rolling away
4.
Remove linch pin
5.
Use the pins to set the correct working
depth.
6.
Fit linch pin
7. Lift the runner until the pins block the

runner.

8. The working depth is now set.
Illustration
Working with the machine
28