Table of Contents
Advertisement
9.2 Coupling the machine
In order to use the machine it must first be coupled up
1.
Set the tractor lift arms at equal height
2.
Check that the PTO drive shaft slides in and out easily (lubricate!)
3.
Send people away from the danger area between the tractor and the machine
4.
Drive the tractor close to the machine, leaving about 25 cm of room between the tractor and the
machine
5.
Secure the tractor to prevent unintended starting or rolling away
6.
Connect the PTO shaft
7.
Reverse further with the tractor towards the machine
8.
Connect the three-point hitch to the machine's coupling points. Ensure the coupling points are
properly secured
9.
Use the stabilizer rods to secure the tractor's lifting arms
10.
Raise the machine so that it is in the transport position. Be aware of the max. lifting height
11.
Raise support legs up and lock them again with a linch pin
12.
When checking the free space around the PTO drive shaft, make sure there is enough space at
the hitch bar!
13.
By performing a visual inspection, check that the three-point hitch is properly locked before driving
away
Working with the machine
26
Hide quick links:
Advertisement
Table of Contents
