imants ShockWave 100 Manual page 12

Standing on or within the range of the machine during work is prohibited. This also applies
during transport.
The maximum load of the tractor tyres, given by the tyre manufacturer, should not be
exceeded during operation of the machine.
Warning labels should always be legible.
Work may only be carried out under a raised machine if the machine has been properly
supported.
For reasons of quality and safety, only use original Imants® parts.
Maintain the machine as indicated later in the manual. Only perform this work when the
machine is at a complete stop. Remove the key from the tractor's ignition.
Modifications, additions or developments on or to the machine are not allowed without the
written permission of Imants BV. This includes welding on load bearing parts. Without this
written authorisation, Imants BV's responsibility for the CE marking is invalidated and is
passed on to the buyer.
12
Safety instructions