Pc Settings - Sylvania LD370SC8 S Owner's Manual

O
PTIONAL SETTING
Sub Rating
FV Fantasy Violence
V Violence
S Sexual Situation
L Coarse Language
D Suggestive Dialogue
Note:
• Blocked sub rating will appear beside the main rating
category in "TV Rating" menu.
• You cannot block a sub rating (D, L, S or V) if the main
rating is set to "View".
• Changing the category to "Block" or "View" automatically
changes all its sub ratings to the same ("Block" or "View").
C. New Password C. New Password
Although the default code "0000" is supplied with the unit, you can set
your own password.
4
Use [Cursor K / L] to select "New Password", then press
[ENTER].
5
Press [the Number buttons] to enter the new 4-digit
password.
• Enter password again in "Confirm password. " entry
field.
6
Press [SETUP] to exit.
Note:
• Make sure new password and confirm password must be
exactly the same. If they are different, the space is cleared
for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs. If you forget the
password, unplug the power cord for 10 seconds to restore
the password to 0000.
26
EN
Category Rating
TV-Y7
TV-PG
TV-14
TV-MA
TV-PG, TV-14
V-chip V-chip
MPAA Rating
TV Rating
Downloadable Rating
Clear Downloadable Rating
New Password
V-chip
V-chip
- - - -
Enter password.
- - - -
Confirm password.
BACK
PIN Code

PC Settings

This function lets you adjust the PC screen position, clock and phase during
PC input.
1
Repeat steps 1 and 2 in "Closed Caption"on page 22.
2
Use [Cursor K / L] to select "PC Settings", then press
[ENTER].
3
Use [Cursor K / L] to select the setting you want to
adjust, then press [ENTER].
4
Adjust the setting.
Auto Adjustment
Use [Cursor K / L] to select "Adjust", then press
[ENTER].
• The Horizontal/Vertical position, clock and phase of
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position
Use [Cursor s / B] to adjust.
Back
Horizontal Position
H. Position 0
Adjust
Vertical Position
V. Position 0
Adjust
Clock, Phase
Use [Cursor { / B] to adjust the "Clock" setting to
stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Clock
Clock 0
Adjust
Phase
Phase 0
Adjust
Detail Detail
Closed Caption
V–chip
PC Settings
HDMI1 Audio
Blue LED
PC Settings
PC Settings
Auto Adjustment
Horizontal Position
Vertical Position
Clock
Phase
Auto Adjustment Auto Adjustment
This function automatically
adjusts the position, clock and
phase of the picture element.
Cursor s
to move PC
screen left
Move Enter
ENTER
to move PC
screen down
Move Enter
ENTER
Cursor s
Move Enter
ENTER
to decrease
setting value
Move ENTER Enter
Auto
Power on
- -
- -
- -
- -
Cancel
Adjust
Cursor B
to move PC
screen right
to move PC
screen up
Cursor B
to increase
setting value