Switching Each Mode; Switching Audio Mode - Sylvania LD370SC8 S Owner's Manual

W
ATCHING TV
To Cancel the Sleep Timer
Press [SLEEP] repeatedly until "Sleep Off" is displayed
on the TV screen.
Note:
• The sleep timer setting display will automatically
disappear in a few seconds.
• When you disconnect the unit from the AC outlet or when
a power failure occurs, the sleep timer setting will be
canceled.

Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV
(NTSC) or to access an external device when they are connected to the unit.
Press [INPUT SELECT] or [CH K] repeatedly to cycle
through the input modes.
or
• Pressing [CH L] reverses the direction of the mode.
• To use the video or S-video input jack of VIDEO 1 on
the unit, select "Video1".
• To use the video or S-video input jack of VIDEO 2 on
the unit, select "Video2".
• To use the component video input jack of
COMPONENT 1 on the unit, select "Component1".
• To use the component video input jack of
COMPONENT 2 on the unit, select "Component2".
• To use the HDMI 1-IN jack on the unit, select "HDMI1".
• To use the HDMI 2-IN jack on the unit, select "HDMI2".
• To use the PC-IN jack on the unit, select "PC".
16
EN
TV/DTV channel
Video1
Video2
Component1
Component2
HDMI1
HDMI2
PC

Switching Audio Mode

This section describes how to switch the audio language.
TV
1
Press [AUDIO] to display the currently selected
audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.
When all audio are available
SAP / STEREO
SAP /
When stereo and monaural audio are available
MONO / STEREO
When SAP and monaural audio are available
SAP / MONO
When only monaural audio is available
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
• The information display will automatically disappear
in a few seconds.
DTV
1
Press [AUDIO] to display the currently selected
language and the number of available languages.
2
Press [AUDIO] repeatedly to cycle through the
available audio languages.
• Available languages differ depending on the
broadcast. "Other" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
• The information display will automatically disappear
in a few seconds.
Note:
• Pressing [AUDIO] does not control external audio device.
6
SAP / STEREO
SAP / MONO
STEREO
MONO / STEREO
SAP / MONO
MONO
6-1
English 1/3