Sunnydaze Decor AMP-F396A User Manual

USER'S MANUAL
This instruction contains important information for using the product for the first time. Please keep
this instruction for later reference. It should always accompany the product in the event of transfer a
new user.

1 OVERVIEW

1.1 The solar pump is designed for fountain and outdoor use. In order for the solar pump to operate,
the solar panel needs to be in direct sunlight.
1.2 This solar pump is equipped with battery pack and can be switched on and off by a switch in the
middle of the solar panel. In evening, four built-in white LEDs will give light automatically to
enhance the beauty scene of the water jet.

2 ASSEMBLY

2.1 Unpack all components carefully.
2.2 Place reservoir on top of base and twist the reservoir clockwise to fit together as shown in
Diagram.
2.3 Connect the pump cable to the socket of the rear side of solar panel, connect the tube between
the vent of the DC pump and the rear middle side of the solar panel.
2.4 Pour enough water to the fountain birdbath and make sure the pump is fully submerged in water
when place the solar pump on the birdbath.
2.5 Connect sprinkle heads to fountain head of the middle side of the solar panel as required.
2.6 The solar fountain is now ready to use.
Attention:
Make sure the pump cable plug into
the socket tightly before using.
Thank you for choosing Sunnydaze Décor. If you have any questions,
comments or concerns please feel free to contact us by phone at: 888-881-4668,
by email: customerservice@serenityhealth.com, or you could also email us
via our contact us page at: www.SerenityHealth.com/contact-us/.
We stand behind our brand and the quality of the items we sell. We will send
new parts, or replace products at our discretion within the one year warranty
period. Before we can help, you will need to provide proof of purchase with the
date of purchase and photos of the defective merchandise. We will use the
photos to determine the cause of defect and for future quality control.