Brother PT-P710BT Quick Setup Manual page 5

3. Insert the Tape Cassette
1. Place your fingers on the Tape
Exit Slot.
2. Open the Cassette Cover by
pulling the Tape Exit Slot to the
left.
3. Confirm that the tape is pointed at
the Tape Exit Slot and gently press
the Tape Cassette into the label
printer until it locks into place.
• Make sure that there is no
slack in the tape. To fix any
slack, pull the end of the
tape out of the Tape Guide.
• When inserting or
removing the Tape
Cassette, make sure that
the tape does not catch on
the label printer.
4. Close the Cassette Cover.