Device Care/Cleaning Device Care/Cleaning Instructions Device Care/Cleaning Instructions; General Care Instructions; Electrical Contacts; Battery Change - Envitec AlcoQuant 6020 Operating Instructions Manual

9 9 9 9 Device care/Cleaning instructions Device care/Cleaning instructions
Device care/Cleaning instructions Device care/Cleaning instructions
9.1 9.1

General care instructions

General care instructions
9.1 9.1 General care instructions General care instructions
It is recommended that you use only mild cleaning agents to clean the device (preferably a
cloth slightly moistened with water or washing up liquid generously diluted etc). Organic
solvents such as pure alcohol, acetone, turpentine etc. should never be used for cleaning.
Care should be taken that no fluid penetrates the interior of the device. Special attention
should be paid to the aperture of the port that holds the mouthpiece as well as the
expiration apertures at the back of the device. The battery contacts and the serial interface
must also be kept dry and clean.
9.2 9.2 9.2 9.2

Electrical contacts

Electrical contacts Electrical contacts Electrical contacts
Care must be taken that the electrical contacts inside the device (battery) and on the serial
interface remain clean and dry to ensure that the device functions perfectly for many years.
9.3 9.3 9.3 9.3

Battery change

Battery change Battery change Battery change
9.3.1 9.3.1 9.3.1 9.3.1

Battery charge indicator

Battery charge indicator Battery charge indicator Battery charge indicator
The AlcoQuant® 6020 displays the state of charge (SOC) of the batteries at all times.
If the SOC of the batteries is too low the following is displayed:
25
12:34
Change
battery
AlcoQuant® 6020 – Breathalyser – Operating Instructions