Possible Errors In The Case Of Active Measurement; Blow Failure; Flat Battery - Envitec AlcoQuant 6020 Operating Instructions Manual

6.4 6.4 6.4 6.4

Possible errors in the case of active measurement

Possible errors in the case of active measurement Possible errors in the case of active measurement Possible errors in the case of active measurement
6.4.1 6.4.1 6.4.1 6.4.1

Blow failure

Blow failure Blow failure Blow failure
If during sample collection the test person blows into the AlcoQuant® 6020 to less or to
strong (8l/min < Flow < 70l/min) or not continuously, the measuring procedure is
automatically terminated and the following error message is displayed:
After this message the device automatically becomes ready to measure again (items in
Section 6.2.2) and measuring can be repeated.
6.4.2 6.4.2 6.4.2 6.4.2

Flat battery

Flat battery Flat battery Flat battery
A repeated signal tone and the status display "Change battery" indicates that the batteries
must be replaced. The device switches off after 10 seconds.
13
AlcoQuant® 6020 – Breathalyser – Operating Instructions