Protective earthing terminal. The apparatus should be connected to a mains socket with a protective earthing connection. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 – 3 – AtlasIED.com Specifications are subject to change without notice.
Page 4
Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the AC outlet and contact AtlasIED. Do not to attempt to continue operation with the product as this may cause fire or electric shock: •...
If a person is not trained, they shall contact the IED factory for direction on how to operate and maintain an IED system. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 – 5 – AtlasIED.com Specifications are subject to change without notice.
Page 6
Do not work within the equipment without the presence of a person who is capable of rendering aid, and who is familiar with the procedure for emergency shutdown of the equipment. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 AtlasIED.com – 6 – Specifications are subject to change without notice.
Page 7
Cela peut créé des courants très élevés où des étincelles pourrait blesser les yeux, fondre les métaux et causer des brûlures. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 – 7 – AtlasIED.com Specifications are subject to change without notice.
Page 8
Red Cross or local emergency response personnel such as the police and fire department. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 AtlasIED.com – 8 – Specifications are subject to change without notice.
Loop faults are indicated via yellow LEDs on the 1516ALI/1516BLI unit and are reported over the network to an AtlasIED GLOBALCOM system. Faults can be disabled via 2-pin ®...
Page 10
If PoE power compliant with IEEE 802.3af is available, it can be used to power the device. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 AtlasIED.com – 10 – Specifications are subject to change without notice.
Install Unit Into A Rack The ideal location for mounting the 1516ALI is on rear rack rails, typically right behind the AtlasIED amplifier units to which they will connect. Alternately, they may be placed on rails near the speaker field wiring terminal blocks in the rack.
Page 12
1516ALI & 1516BLI Install Instructions Class A/B Loop Interface Figure 3: Testing a Speaker Loop 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 AtlasIED.com – 12 – Specifications are subject to change without notice.
If the network does not supply PoE power, then the device should be powered from a separate 48V DC supply connected to the Auxiliary Power Input jack (5). 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 – 13 – AtlasIED.com Specifications are subject to change without notice.
“iednet” (without the quotes). This password can be changed on the Settings page, once accessed, if desired. Figure 6: 1516ALI Settings Authorization 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 AtlasIED.com – 14 – Specifications are subject to change without notice.
Page 15
When changes are made and saved, the web page will prompt to reset the device via the button and red notification shown in the figure below. Figure 8: Prompt Reset 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 – 15 – AtlasIED.com Specifications are subject to change without notice.
The Supervision Details field is not used for this device. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 AtlasIED.com – 16 – Specifications are subject to change without notice.
Page 17
Once entered, the fault descriptions in the Current Faults list will change, such as shown below. This process of entering descriptions can/should be repeated for all loops on all 1516ALI devices. 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 – 17 – AtlasIED.com Specifications are subject to change without notice.
IP address, or changing the computer to be on the 10.x.y.z network 9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A. Telephone: 502.267.7436 • Fax: 502.267.9070 AtlasIED.com – 18 – Specifications are subject to change without notice.
PARTICULAR PURPOSE. AtlasIED does not assume, or does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Need help?
Do you have a question about the A Series and is the answer not in the manual?
Questions and answers