Teknim ATP545 Installation And User Manual

ATP545 Digital Passive Infrared Detector
ATP545P Pet-Immune Digital Passive Infrared Detector
ATP545LR Long Range Digital Passive Infrared Detector
Installation and User Manuel
TECHNICAL SPECIFICATIONS
Infrared sensor
Alarm period
Power requirement
Alarm output
Sensitivity setting
Pulse count
Tamper
Activation LED
Detectable speed
Pet Immunity
Mounting height
Humidity
Temperature
Dimensions
Weight
Temperature
compensation

Technical specifications
notification.
COMPONENTS
Infrared sensor
Activation LED
Pulse jumper
Warning: Do not touch to the Infrared sensor
MOUNTING
WARNING!
For ATP545P, it must be mounted to 2.1-2.5m height
wall without mounting foot for correctly running pet
immunity feature.
Dual element, Digital
3 sec.
9 ~ 16 VDC, 20mA
N.C 30VDC, 0.2A max.
With trimpot
3 modes, 1, 2, 3
N.C (cover open and wall
removal activated)
Red, can be disable
0.3 ~ 1.5m/sec.
20 kg, 60cm (ATP545P)
For all model 2.1 ~ 2.5m
95% RH (max)
-20  C ~ 45  C (-4  F ~ 113  F)
108 X 63 X 50 mm
80 gr
Yes
may be changed
Connections
Sensitivity setting
Tamper switch
LED on/off jumper
Issue Date: 05/02/2016
CABLE CONNECTIONS
Insert the PCB to it's place and connect the signal cables
related points.
POWER
: 9 ~ 16 VDC power supply
ALARM : Control panel zone input (N.C)
TAMPER : Tamper switch contacts (NC)
SENSITIVITY SETTING
without
ATP545 series PIR detectors have the sensitivity setting with
trimpot For adjusting, use a thin screwdriver.
Sensing dis. for ATP545 Digital Passive Infrared Detector
Sensing distance when SENS Pot is lowest pos.
Sensing distance when SENS Pot is center pos.
Sensing distance when SENS Pot is highest pos.
PULSE SETTING
ATP545 series PIR detectors have pulse setting with 3 levels
(1, 2, 3)
ACTIVATION LED SETTING
Set to "OFF" mode, if you do not want that LED is off when
the detector detects any moving.
: 8m
: 12m
: 14m