Installing The Printer Driver; Setting The Dip Switches - Sony UP-D895MD Instructions For Use Manual

Installing the Printer
Driver
Install the printer driver provided with the printer. For
detailed instructions about how to install the printer
driver, refer to the Readme.txt file on the printer driver
installer disc.

Setting the DIP Switches

Set the DIP switches for how you intend to use the
printer. To change the DIP switches, first switch off the
printer and then use a small screwdriver with a small
point to move the switches.
The factory settings are shown below.
DIP SW
OFF
ON
USB DIP SW
OFF
ON
DIP SW FUNCTION TABLE
NO FUNCTION SW-ON
1 POST FEED ON
2 RESERVED
3 RESERVED
4 RESERVED
5 RESERVED
6 RESERVED
7 RESERVED
8 RESERVED
DIP SW FUNCTION TABLE
No. Function
1 POST FEED ON
2 RESERVED
3 RESERVED
4 RESERVED
5 RESERVED
6 RESERVED
7 RESERVED
8 RESERVED
A A POSTFEED switch A A
Selects the paper feed method for after printing.
ON: Feeds extra blank paper between prints.
OFF: Feeds less paper between prints to conserve
paper, or when printing multiple pictures on
the same sheet. More pictures can be printed
on one sheet, but because there is so little
space between printed pictures, you must
press the FEED button before cutting the
paper.
B B B B – H H H RESERVED switch H
Ordinarily, leave these switches set to ON (the
factory setting).
Installing the Printer Driver / Setting the DIP Switches
SW-OFF
OFF
AC IN
ON OFF
OFF
——— ———
——— ———
——— ———
——— ———
——— ———
——— ———
——— ———
6