How To Connect Recorder - Luxman CL-38uC Owner's Manual

How to connect recorder

1. Connection to MONITOR terminal (playback)
Connect between the line output terminals (LINE OUT) of a
recorder and the MONITOR terminals of this unit with pinplug
cables in consideration of L and R. When the MONITOR
switch on the front panel is turned on, the playback of the
recorder is possible.
2. Connection to REC OUT terminal (recording)
When the sound source from various input devices con-
nected to the PHONO, LINE, or other terminals of this unit
is played back, the signals are provided to the REC OUT
terminal.
Connection between the REC OUT terminal of this unit and
the line input terminals (LINE IN) of the recorder with pinplug
cables is required for recording on the recorder. After the
connection, you can enjoy listening to the sound from the
speaker system and record the sound at the same time.
These output signals for recording are not affected by the
control functions such as the volume control and tone con-
trol functions.
When the input source to be recorded needs not to be
changed, be careful not to operate the input selector espe-
cially during recording with use of the recorder connected
to the REC OUT terminal.
Do not insert short pin plugs into the REC OUT terminal.
No sound will be generated.
Be aware that the playback sound volume may become
lower or no sound may be generated if a CD recorder, a
tape recorder, or other recorders are connected, which
extremely decrease the impedances of their line input ter-
minals or cause short circuits on their line input terminals
when the power is turned off.
VACUUM TUBE CONTROL AMPLIFIER CL-38uC
How to connect a power amplifier
Connect between the input terminal of an output device such
as a power amplifier and a line output terminals(either LINE-1
or LINE-2) of this unit with a pin-plug cable.
At this moment, exercise extra care not to conduct wrong
connection between the right and left channels. If the right
and left channels are connected reversely, the localization of
sound images is deteriorated, thus failing in normal stereo
playback.
If the grounding of the pin-plug cables is inadequately con-
nected, noises including hum may be generated, resulting in
an adverse S/N ratio. Surely insert the connection plug.
11