Performance Verification
18
Caution: During POST (immediately after power-up), confirm that all
display segments and icons are shown, and the monitor speaker sounds a
one-second tone.
When the monitor is turned on, the backlight remains on. The display displays the
following sequence, in order, as POST takes place:
•
All display graphics are shown for three seconds and the backlight is
turned on.
•
The display goes blank (all display elements off) for one second.
•
The software version number displays for three seconds as a three digit
number in the right number field (with leading zeros if the version
number is less than 100) and two dashes in the left number field.
•
The current time of day is shown in 24-hour format.
•
Successful completion of POST is announced by a POST pass tone. A
failed POST is announced by a high-priority alarm tone.
Procedure
To run POST:
1. Press the Power button to turn on the monitor.
Note: Do not have a sensor connected to the monitor.
The backlight remains on during POST.
All display numbers and icons are shown for three seconds. The backlight is
turned on.
O
M
N-65 Service Manual
XI
AX