Wall Mounting - auna Areal Bar 550 Manual

Soundbar + subwoofer

Table of Contents

Available languages

Wall Mounting

In order to avoid damage to the equipment and personal injury you should get a qualified person to drill the

fixing surface and fit the appropriate wall fixings. Take care not to allow the main unit to fall while attempt-

ing to hook onto the wall mount brackets.

Before mounting, check the wall strength; consult qualified personnel if

necessary. When drilling into walls, always check that there are no hid-

den wires or pipes etc. Make sure the screws and wall plugs are suitable

for supporting the unit.

Step 1: Align the Sound bar in the chosen location. Use a pencil to mark

the 2 drilling positions with a distance of 287mm (11.3") apart:

Note: The Sound bar should be located at least 7.5cm (3") below the bot-

tom of the TV:

Step 2: Drill holes as marked in step 1:

Step 3: Insert 2 screws (not supplied) into the holes and tighten. Take

care to leave 5mm between the screw heads and the wall.

NOTE: You will need to ensure the screws are long enough to sufficiently

grip the wall while allowing 5mm between screw head and wall.

Step 4: Hook the Sound bar into the screws. For secure mounting, ensure

the screw heads slide firmly into the narrow part of the brackets:

Table of Contents