Wall Mounting - auna Areal Bar 360 HDMI Manual

• USB: Insert USB drives containing music files (MP3/Wav) into the USB socket. Playback starts automa-
tically after a few seconds. Use
Please note: The USB port (power output: 5V) can be used to charge smartphones, tablets, MP3 play-
ers or other small electronic devices (except for any Apple products).
The wall mounting is simple, but should nevertheless be performed by experienced craftsmen when in
doubt. Wrong mounting can lead to damages on the device or injuries. Please pay attention for possible
water or electricity lines when drilling.
Step 1: Attach the brackets ("S") to the sound bar, using the supplied short screws:
Step 2: Make drill hole marks on the wall for the anchors. Make sure the marks are level before drilling. Use
a 6mm bit and power drill (not supplied) to drill holes on the marks. Insert the included plastic anchors into
the holes and push in until they are flush with the wall. Secure the supplied Metallic Brackets (marked "W")
to the wall by screwing the included flat head screws into the anchors and tighten until the screw head is ful-
ly inserted and flush with the metallic bracket. Note: The distance between the brackets should be 350 mm.
16
/ / to operate the music playback.

Wall Mounting