Better Homes and Gardens Bryant Dresser Instruction Booklet page 6

Tools required: Phillips screwdriver, power drill, 3/8" drill bit and rubber mallet.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Ask for assistance to position the Dresser (A) at the desired location against a wall. If necessary, adjust
the floor levelers under the Dresser to correct tilting.
3. Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach the
tip-over restraint to the unit and the wall.
NOTE: The tipping restraint hardware included is for drywall construction. It will be necessary to drill
holes for the wall anchors. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance.
4. The dresser is now ready for use.
Assembly Instructions
6