Download Print this page

Stokke Tripp Trapp Baby Set User Manual page 2

Hide thumbs Also See for Tripp Trapp Baby Set:

Advertisement

US/EN
IMPORTANT –
RETAIN FOR FUTURE
REFERENCE – READ
CAREFULLY
Important information
• Make sure the Tripp Trapp® Baby Set™ is properly fastened before
you seat your child in the Tripp Trapp® chair.
• Do not use the Tripp Trapp® Baby Set™ if any part is broken, torn
or missing.
• The seat plate must be in the top slot, and adjusted like shown in
these instructions.
• The maximum recommended load for the Tripp Trapp® chair is 110
kg/242lbs, as the chair can also be used as an adult chair when used
without the Baby Set™.
• The Baby Set, restraint system and Extended Gliders shall always
be in use when Tripp Trapp® is used as a high chair. The product
then complies with ASTM F404.
• Place the child in the chair from the side or behind.
2
| T R I P P T R A P P
BA B Y S E T
®
WARNING:
FALL HAZARD: Children have suffered
severe head injuries including skull
fractures when falling from high chairs.
Falls can happen suddenly if child is not
restrained properly.
• Always use restraints, and adjust to fit snugly.
• Tray is not designed to hold child in chair.
• Stay near and watch child during use.
• The child should be secured in the high
chair at all times by the restraining system.
• It is recommended that the high chair be
used only by children capable of sitting
upright unassisted (approx. 6 months) until
36 months, or when the child can go safely
in and out of the chair on its own accord.
Criteria for use:
• This Baby Set with pre-attached harness fits Tripp Trapp chairs
with model number/item number beginning with 1001, introduced
in Australia 2019. This version of the chair does not come with a
pre-attached harness.
• If you have an older version of the Tripp Trapp chair (manufactured
between 2008 and 2018) with a pre-attahced harenss, this Baby
Still can still be used if the harness is removed from the chair. See
instructions on the next page.
• Adjust seat plate to 4-5 cm/1½-2 in *
* if the seat hole is 2 cm/0.8 in from the edge of the seat plate,
then this measurement should be 4 cm/1½ in.
Cleaning and maintenance
Wipe with a clean damp cloth, wipe off excess of water with a dry
cloth. Moisture will leave cracks in stain. We do not recommend
the use of any detergent. Colours may change if the high chair is
exposed to sunlight.
U S E R G U I D E

Advertisement

loading