Canon NA10 User Manual page 8

Specifying a Static IP Address for the
Device
Perform the following when specification of a static IP address for the
device is necessary, such as when the network does not include a
DHCP server.
1
Turn on the device while holding the DHCP On/Off button.
The power lamp will light. (The other lamps will also light
momentarily and then turn off.) Hold the DHCP On/Off button until
the Connection lamp lights.
CAUTION
If the Connection lamp does not light even after holding the power
button for 3 minutes or more, check the network cable connection.
2
Temporarily change the network address of the computer
to which the device will be connected to "192.168.0.100".
Connect this device to your computer by peer-to-peer connection,
and set a static IP address.
3
Start the web browser, and access the "http://
192.168.0.10/" URL.
The device's web page opens, and the login screen is displayed.
4
Specify the IP address for the device in the [Network
Setting] screen of the web menu.
For details, see "Using the Web Menu" (p. 21).
8