Canon NA10 User Manual page 15

3
Select the scanner.
A Tap [
].
B Select the scanner on the [Select Scanner] screen.
4
Select a computer.
A Tap [
].
B On the [Select computer] screen, select a computer.
CAUTION
Start CaptureOnTouch on the computer.
The computer cannot be selected unless CaptureOnTouch is
running.
5
Tap the job number to execute, and tap [Scan].
Scanning executes according to the scan settings of the selected
job number.
Hint
• Using the CaptureOnTouch favorite on the computer selected in
the above figure, the job is registered as shown below.
• Only the favorites that are registered to the scanner's job buttons
using CaptureOnTouch can be operated from CaptureOnTouch
Job Tool.
15