Parameter List; Troubleshooting - Gira eNet 5323 02 Operating Instructions Manual

Wireless converter intermediate plug
eNet radio data
Radio frequency
Transmission capacity
Radio Bus radio data
Radio frequency 2
Transmission capacity

5.2 Parameter list

i Only with eNet Server Software up to version 1.4
The device parameters can be changed with the eNet server:
Settings window
Device settings
Parameters
Repeater mode
Settings, channel
Parameters
Local Operation
Manual commissioning
Sum status / transmission
repetitions

5.3 Troubleshooting

Additional connections between the transmitter and receiver cannot be saved.
Cause: all the memory locations in the gateway are occupied.
Disconnect connections no longer required.
Or
Reset the gateway to the default setting and reconnect the transmitter and actuators.
Or
Use an additional gateway for new connections.
5.4 Conformity
Gira Giersiepen GmbH & Co. KG hereby declares that the radio system type
Order No. 5323 02
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.gira.de/konformitaet
32582112 10865123
Setting options, Basic
setting
On, Off
Basic setting: Off
Setting options, Basic
setting
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off/Transmit 2x...11x,
Off/Transmit 4x (without
connection)
Basic setting: Off
11.04.2017
868.0 ... 868.6 MHz
max. 20 mW
max. 10 mW
Explanations
In addition to its other
functions, the device can be
used as a repeater. In the
"On" setting, the device
repeats all the received
telegrams.
Explanations
With this device, the
parameter has no function.
With this device, the
parameter has no function.
With this device, the
parameter has no function.
7/8