14
MAINTENANCE
14.1
Maintenance activities:
Make sure that repairs to the motor and the machine are performed by qualified personnel.
Make sure that the plug is removed from the electrical outlet before performing maintenance.
14.2
Cleaning
Cleaning: The use of paint thinners, gasoline, corrosive chemicals or abrasive
cleaners will result in damage to the surface!
Therefore: When cleaning, use only mild detergent
14.3
Disposal
Do not dispose of your waste in the ZI-FS115. Contact your local authorities for
information regarding the available disposal options. When replace your old unit
with a new one at your local dealer, is obligated to take back your old equipment
free of charge for the purpose of proper disposal.
15
TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Engine will not start
Saw blade wobbles
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-FS115
N O T E
Possible Cause
Plug is damaged / defective
cutting wheel shaft
MAINTENANCE
Solution
Renew plug from electrical
specialist
Check ball bearings, shaft,
flange and nut.
Replace if defective
20