Extron electronics RGB 203 Rxi User Manual page 3

im Vertrieb von
www.camboard.de
CAMBOARD Electronics
Step 1
Turn the equipment off and disconnect the equipment power.
Step 2
For positive or negative output sync (rather than sync following the
input), to clamp sync timing to the back porch, or to disable the mini
VTG timeout (RGB 203 Rxi VTG only), open the interface and
configure the jumpers and/or DIP switches. See Internal Configuration,
beginning on page 2-3, for details.
Step 3
Rack, under-desk, or through-desk mount the interface as desired.
Rack — Use the optional 1U Rack Shelf, part #60-190-01.
Under-desk — Use the optional Under-Desk Mount Kit, part #70-077-01.
Thru-desk — Use the optional Thru-Desk Mount Kit, part #70-077-02.
Step 4
Video inputs — Connect an RGBHV, RGBS, RGsB or RsGsBs video
input to each 15-pin HD Input connector as desired.
Step 5
Audio inputs — Connect an unbalanced stereo audio source (such as a
computer or a CD player) to each 3.5 mm mini stereo Audio connector
for unbalanced audio input as desired. See the figure below to wire
the audio plug.
Step 6
Monitor output — If desired, connect a local monitor or other device
to this 15-pin HD female connector.
Step 7
Video output — Connect an RGBHV, RGBS, or RGsB video display or
other device as shown below.
Tel. 07131 911201
Fax 07131 911203
Quick Start Guide — RGB 203 Rxi, , , , ,
RGB 203 Rxi VTG
Tip (L)
Ring (R)
Sleeve ( )
R G B R G B
H V S H V S
RGBHV RGBS
ce-info@camboard.de
RGB 203 Rxi, RGB 203 Rxi VTG • Quick Start Guide
R G B
H V S
RGsB