Initializing Of Data On Ram - Sony BKDS-7017 Installation Manual

6-2. Installation of Program (BZS-7080)
(5) Press [F9] (YES) key.
The loading of the program starts.
(6) When loading is completed, "Load Complete. Insert the OPERATING PROGRAM 2." is indicated
on the display, and the display for the function keys is changed as follows.
F1
(7) Insert the OPERATING PROGRAM 2 (Control panel software) to the disk drive, and press
[F10] (EXEC) key.
Loading starts.
(8) When loading is completed, all datum of the switcher, and control are cleared.

6-2-2. Initializing of Data on RAM

(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[SETUP], [1] (SYSTEM), [F6] (INITIALIZE)
The display for the function keys is changed as follows.
RESET
PANEL
F1
(2) Press [F4] (PANEL) key (to display in the reverse) and [F5] (SWER) key (to display in the re-
verse), then [F10] (EXEC) key. The display for the function keys is changed as follows.
F1
(3) Press [F9] (YES) key.
The data on the "RAM" is initialized, and all data are reset to the factory setting.
6-6
F2 F3 F4 F5
ALL CLEAR
SWER PANEL SWER
F2 F3 F4 F5
F2 F3 F4 F5
EXEC
F8 F9 F10
F6 F7
EXEC
F6 F7 F8 F9 F10
YES NO
F6 F7 F8 F9 F10
DVS-7150E IM