Aspire Nautilus AIO User Manual page 48

Operation of the Device
Changing the Atomizer Head
1. Press the pod release buttons simultaneously on the left and right side of the device. Remove the pod
by pulling it upwards. Hold the pod upside down that the mouthpiece points to the ground.
2. Remove the chimney unit with the connected atomizer head by unscrewing it counterclockwise and
pulling it out.
3. Unscrew the old atomizer head from the Airflow Control unit and insert a new one. Please first drip a
few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Connect all parts again.
5. Reconnect the pod system to the power unit. Both parts are connected properly when you hear a
soft click.
Please also note the information on
page 42.
46